Yeoman and servicing Bedienerhandbuch PDF herunterladen (Seite 13)

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

Note: This appliance must only be installed with the flue

supplied.

You must adhere to the following:

1.1 The flue must be sited in accordance with BS5440: Part 1

(latest edition). See Diagram 1.

1.2 Fit a guard to protect people from any terminal less than 2

metres above any access such as level ground, a balcony or

above a flat roof.

1.3 All vertical and horizontal flues must be securely fixed and

fire precautions followed in accordance with local and

national codes of practice.

1.4 A restrictor may be required. Refer to Technical

Specifications on page 11.

1.5 Two types of flue terminals are available, horizontal and

vertical. To measure for a horizontal terminal:

– Decide on the terminal position.

– Measure the height from the top of the appliance to the

centre of the required outlet.

For minimum and maximum flue dimensions see Diagram

1A / 1B.

Allow enough room either above or to the side of the

appliance to assemble the flue on top.

Assemble a horizontal flue in the following order:

- Vertical section

- 90° elbow

- Horizontal plus terminal

Support the opening of a masonry installation with a

lintel.

1.6 Only the horizontal terminal section can be reduced in size.

1. FLUE AND CHIMNEY REQUIREMENTS

UK Dimensions

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Keine Kommentare

Yeoman and servicing Bedienerhandbuch Seite 13