Yeoman and servicing Bedienerhandbuch Seite 18

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 44
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 17
18
INSTALLATION INSTRUCTIONS
INSTALLATION
1
AR2694
2.3 Remove the frame to gain complete access to the control
box and the viewing aperture by lifting the hooks clear of
the slots on the front of the appliance, See Diagram 2.
2
AR2693
SECURING THE APPLIANCE
The appliance sits on a mounting bracket to secure it in
place to either the hearth or bench.
2.4 Position the appliance:
Loosely attach the bracket to the appliance and place
centrally on the hearth OR in the desired position on the
bench. Remove the appliance leaving the bracket in the
correct position and mark the holes to drill the bracket
screws, Diagram 3.
3
AR2458
Brackets
IMPORTANT: REFER TO DATA BADGE AND TECHNICAL
SPECIFICATION AT THE FRONT OF THE MANUAL TO
ENSURE THE APPLIANCE IS CORRECTLY ADJUSTED FOR
THE GAS TYPE AND CATEGORY APPLICABLE IN THE
COUNTRY OF USE.
FOR DETAILS OF CHANGING BETWEEN GAS TYPES
REFER TO SECTION 16, SERVICING, ‘REPLACING PARTS’.
1. SAFETY PRECAUTIONS
1.1 For your own and other’s safety, you must install this
appliance according to local and national codes of practice.
Failure to install the stove correctly could lead to
prosecution.
Read these instructions before installing and using this
appliance.
1.2 These instructions must be left intact with the user.
1.3 Do not attempt to burn rubbish on this appliance.
1.4 Keep all plastic bags away from young children.
1.5 Do not place any object on or near to the appliance and
allow adequate clearance above the appliance.
IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN
USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO
RELIGHT THE APPLIANCE.
2. INSTALLATION OF THE APPLIANCE
IMPORTANT: THE OUTER PANELLING OF THE YEOMAN
CL IS MADE FROM CAST IRON. USE CAUTION WHEN
INSTALLING, REMOVING AND STORING AS THE
COMPONENTS ARE HEAVY AND SHOULD BE HANDLED
CAREFULLY.
2.1 Remove the appliance from the carton and discard all
unnecessary packaging ensuring no components are thrown
away when unpacking. The cast lid is stored on top of the
appliance. Remove and store in a safe place.
2.2 All Models
Remove the plinth to access the touchpad and battery box
by lifting the hooks clear of the slots on the front of the
appliance, See Diagram 1.
Seitenansicht 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare