Yeoman and servicing Bedienerhandbuch PDF herunterladen (Seite 8)

USER INSTRUCTIONS

7a.3 Place the second log into the left hand groove on the

burner tray and ensure it is pushed as far into the centre as

the groove will allow, Diagram 10.

AR2103

Log 2

7a.4 Place the third log into the groove on the right hand side

and ensure it is pushed as far into the centre as the groove

will allow, Diagram 11.

AR2103

Log 3

7a.5 Once the logs are in place use some of the Embaglow wire

wool provided and cover the ports in the burner tray with a

liberal amount of fibres, See Diagram 12.

NOTE: It is not necessary to use all of the Embaglow.

AR2103

Embaglow

7a.6 Fix log bar into position, See Diagram 13.

AR2103

7B. CL5 LAYOUT

7b.1 Ensure the burner tray is clean and free from any debris,

Diagram 14.

AR2103

The three logs that make up the fuel bed are visually

distinct and fit into specific parts on the burner tray.

7b.2 Place the rear log into position between the rear brackets

and pushed up against the back panel as illustrated in

Diagram 15.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Keine Kommentare

Yeoman and servicing Bedienerhandbuch Seite 8